Samba-Freigaben können in Windows 10 nicht angezeigt werden

Ich habe einen NAS-Server mit Ubuntu Server 14.04.5 (Trusty Tahr) und Samba 4.3.11. Um ehrlich zu sein, kenne ich nicht alle Komplexitäten von Samba und habe den NAS mit ein paar YouTube-Videos eingerichtet.

Ich habe einige Nachforschungen angestellt und denke, dass ich die Freigabe nicht sehen kann, da Windows 10 SMB 3.11 verwendet, aber ich habe auch gelesen, dass dies in Samba ab Version 4.3 behoben wird.

Ich habe vier Windows 7-Computer, zwei Raspberry Pis mit OpenELEC, zwei HTPCs mit OpenELEC, fünf Android-Geräte und einen Windows 10-Laptop. Ich kann die freigegebenen Ordner auf allen Computern mit Ausnahme des Windows 10-Computers (Build 1607) sehen.

Ich habe versucht, SMBv1 in Windows 10 zu aktivieren (wie von der Internetsuche vorgeschlagen), aber dies hat nicht funktioniert. Warum kann ich die Freigaben nicht sehen?

Ich gehe davon aus, dass es unter Samba ein Einstellungsproblem gibt (ich kann alle Windows 7-Computer auf dem Windows 10-Computer sehen und umgekehrt).

Ich habe es geschafft, zweimal auf die Freigabe zuzugreifen. Das erste war, als ich die Maschine bekam; Es wurde vor kurzem immer wieder angeschlossen, als ich das Ethernet-Kabel für das NAS wechseln musste. Es wird in meinem Netzwerk nicht angezeigt, aber ich kann die IP-Adresse anpingen, mich über SSH anmelden und mich über webmin vom Windows 10-Computer aus anmelden.

Ich habe mich am Kopf gekratzt. Das SMB.conf Datei ist unten aufgeführt:

# Sample configuration file for the Samba suite for Debian GNU/Linux.
#
#
# This is the main Samba configuration file. You should read the
# smb.conf(5) manual page in order to understand the options listed
# here. Samba has a huge number of configurable options most of which
# are not shown in this example
#
# Some options that are often worth tuning have been included as
# commented-out examples in this file.
#  - When such options are commented with ";", the proposed setting
#    differs from the default Samba behaviour
#  - When commented with "#", the proposed setting is the default
#    behaviour of Samba but the option is considered important
#    enough to be mentioned here
#
# NOTE: Whenever you modify this file you should run the command
# "testparm" to check that you have not made any basic syntactic
# errors.

#======================= Global Settings =======================

[global]
browseable = no
max log size = 1000
passwd chat = *Enter\snew\s*\spassword:* %n\n *Retype\snew\s*\spassword:* %n\n *password\supdated\ssuccessfully* .
syslog = 0
workgroup = PHD
pam password change = yes
passwd program = /usr/bin/passwd %u
panic action = /usr/share/samba/panic-action %d
passdb backend = tdbsam
usershare allow guests = yes
os level = 20
wins support = true
load printers = no
server string = %h server (Samba, Ubuntu)
unix password sync = yes
dns proxy = no
obey pam restrictions = yes
log file = /var/log/samba/log.%m
server role = standalone server
map to guest = bad user
netbios name = NAS-DRIVE
available = no

## Browsing/Identification ###

# Change this to the workgroup/NT-domain name your Samba server will part of

# server string is the equivalent of the NT Description field

# Windows Internet Name Serving Support Section:
# WINS Support - Tells the NMBD component of Samba to enable its WINS Server

# WINS Server - Tells the NMBD components of Samba to be a WINS Client
# Note: Samba can be either a WINS Server, or a WINS Client, but NOT both
;   wins server = w.x.y.z

# This will prevent nmbd to search for NetBIOS names through DNS.

#### Networking ####

# The specific set of interfaces / networks to bind to
# This can be either the interface name or an IP address/netmask;
# interface names are normally preferred
;   interfaces = 127.0.0.0/8 eth0

# Only bind to the named interfaces and/or networks; you must use the
# 'interfaces' option above to use this.
# It is recommended that you enable this feature if your Samba machine is
# not protected by a firewall or is a firewall itself.  However, this
# option cannot handle dynamic or non-broadcast interfaces correctly.
;   bind interfaces only = yes



#### Debugging/Accounting ####

# This tells Samba to use a separate log file for each machine
# that connects

# Cap the size of the individual log files (in KiB).

# If you want Samba to only log through syslog then set the following
# parameter to 'yes'.
#   syslog only = no

# We want Samba to log a minimum amount of information to syslog. Everything
# should go to /var/log/samba/log.{smbd,nmbd} instead. If you want to log
# through syslog you should set the following parameter to something higher.

# Do something sensible when Samba crashes: mail the admin a backtrace


####### Authentication #######

# Server role. Defines in which mode Samba will operate. Possible
# values are "standalone server", "member server", "classic primary
# domain controller", "classic backup domain controller", "active
# directory domain controller".
#
# Most people will want "standalone sever" or "member server".
# Running as "active directory domain controller" will require first
# running "samba-tool domain provision" to wipe databases and create a
# new domain.

# If you are using encrypted passwords, Samba will need to know what
# password database type you are using.


# This boolean parameter controls whether Samba attempts to sync the Unix
# password with the SMB password when the encrypted SMB password in the
# passdb is changed.

# For Unix password sync to work on a Debian GNU/Linux system, the following
# parameters must be set (thanks to Ian Kahan <<kahan@informatik.tu-muenchen.de> for
# sending the correct chat script for the passwd program in Debian Sarge).

# This boolean controls whether PAM will be used for password changes
# when requested by an SMB client instead of the program listed in
# 'passwd program'. The default is 'no'.

# This option controls how unsuccessful authentication attempts are mapped
# to anonymous connections

########## Domains ###########

#
# The following settings only takes effect if 'server role = primary
# classic domain controller', 'server role = backup domain controller'
# or 'domain logons' is set
#

# It specifies the location of the user's
# profile directory from the client point of view) The following
# required a [profiles] share to be setup on the samba server (see
# below)
;   logon path = \\%N\profiles\%U
# Another common choice is storing the profile in the user's home directory
# (this is Samba's default)
#   logon path = \\%N\%U\profile

# The following setting only takes effect if 'domain logons' is set
# It specifies the location of a user's home directory (from the client
# point of view)
;   logon drive = H:
#   logon home = \\%N\%U

# The following setting only takes effect if 'domain logons' is set
# It specifies the script to run during logon. The script must be stored
# in the [netlogon] share
# NOTE: Must be store in 'DOS' file format convention
;   logon script = logon.cmd

# This allows Unix users to be created on the domain controller via the SAMR
# RPC pipe.  The example command creates a user account with a disabled Unix
# password; please adapt to your needs
; add user script = /usr/sbin/adduser --quiet --disabled-password --gecos "" %u

# This allows machine accounts to be created on the domain controller via the
# SAMR RPC pipe.
# The following assumes a "machines" group exists on the system
; add machine script  = /usr/sbin/useradd -g machines -c "%u machine account" -d /var/lib/samba -s /bin/false %u

# This allows Unix groups to be created on the domain controller via the SAMR
# RPC pipe.
; add group script = /usr/sbin/addgroup --force-badname %g

############ Misc ############

# Using the following line enables you to customise your configuration
# on a per machine basis. The %m gets replaced with the netbios name
# of the machine that is connecting
;   include = /home/samba/etc/smb.conf.%m

# Some defaults for winbind (make sure you're not using the ranges
# for something else.)
;   idmap uid = 10000-20000
;   idmap gid = 10000-20000
;   template shell = /bin/bash

# Setup usershare options to enable non-root users to share folders
# with the net usershare command.

# Maximum number of usershare. 0 (default) means that usershare is disabled.
;   usershare max shares = 100

# Allow users who've been granted usershare privileges to create
# public shares, not just authenticated ones

#======================= Share Definitions =======================

# Un-comment the following (and tweak the other settings below to suit)
# to enable the default home directory shares. This will share each
# user's home directory as \\server\username
;[homes]
;   comment = Home Directories
;   browseable = no

# By default, the home directories are exported read-only. Change the
# next parameter to 'no' if you want to be able to write to them.
;   read only = yes

# File creation mask is set to 0700 for security reasons. If you want to
# create files with group=rw permissions, set next parameter to 0775.
;   create mask = 0700

# Directory creation mask is set to 0700 for security reasons. If you want to
# create dirs. with group=rw permissions, set next parameter to 0775.
;   directory mask = 0700

# By default, \\server\username shares can be connected to by anyone
# with access to the samba server.
# Un-comment the following parameter to make sure that only "username"
# can connect to \\server\username
# This might need tweaking when using external authentication schemes
;   valid users = %S

# Un-comment the following and create the netlogon directory for Domain Logons
# (you need to configure Samba to act as a domain controller too.)
;[netlogon]
;   comment = Network Logon Service
;   path = /home/samba/netlogon
;   guest ok = yes
;   read only = yes

# Un-comment the following and create the profiles directory to store
# users profiles (see the "logon path" option above)
# (you need to configure Samba to act as a domain controller too.)
# The path below should be writable by all users so that their
# profile directory may be created the first time they log on
;[profiles]
;   comment = Users profiles
;   path = /home/samba/profiles
;   guest ok = no
;   browseable = no
;   create mask = 0600
;   directory mask = 0700

[printers]
   comment = All Printers
   browseable = no
   path = /var/spool/samba
   printable = yes
   guest ok = no
   read only = yes
   create mask = 0700

# Windows clients look for this share name as a source of downloadable
# printer drivers
[print$]
  comment = Printer Drivers
  path = /var/lib/samba/printers
  browseable = yes
  read only = yes
  guest ok = no
# Uncomment to allow remote administration of Windows print drivers.
# You may need to replace 'lpadmin' with the name of the group your
# admin users are members of.
# Please note that you also need to set appropriate Unix permissions
# to the drivers directory for these users to have write rights in it
;   write list = root, @lpadmin
[Films]
 comment = Films
 path = /home/paulnas/Raid/Films
 browseable = yes
 read only = no

[Films 2]
 comment = Films2
 path = /home/paulnas/Raid/Films2
 browseable = yes
 read only = no

[Kids Films]
 comment = Kids Films
 path = /home/paulnas/Raid/Kids_films
 browseable = yes
 read only = no

[Music]
 comment = Music
 path = /home/paulnas/Raid/Music
 browseable = yes
 read only = no

[Photos]
 comment = Photos
 path = home/paulnas/Raid/Photos
 browseable = yes
 read only = no

Vielleicht hilft das:

1. Führen Sie Windows PowerShell als "Administrator" aus.

2. Geben Sie die folgenden Befehle ein:

   sc.exe config lanmanworkstation depend= bowser/mrxsmb10/nsi
   sc.exe config mrxsmb20 start= disabled
   

3. Starten Sie neu

4. Den Server im Netzwerk anzeigen

Quelle: Ubuntu-Server im Netzwerk wird nicht erkannt